Cam Types We Manufacture
Every type of cam profile that converts rotary motion into linear or oscillating motion — machined with 5-axis CNC.
Disc Cam
The most common cam type; variable-radius profile on a flat plate. The motion law (DRDRD, cycloidal, harmonic) is specified by the customer. Essential for packaging and printing machinery.
- Profile for any motion law
- Steel / Cast iron / Stainless
- Profile tolerance ±0.005 mm
Cylindrical Cam
Cams that move the follower axially via a helical groove on the cylinder surface. Compact design and high force capacity make them common in automation and textile machinery.
- Groove tolerance ±0.01 mm
- 5-axis CNC machining
- Lubricated or dry operation
Face Cam
Cams that drive the follower axially via a groove or surface profile on a flat face. Offers an alternative to disc cams in applications requiring compact axial length.
- Face profile ±0.008 mm
- Double-sided profiling available
- Steel / aluminium options
Index Cam (Globoid)
High-precision globoid or flat index cams that rotate the output shaft step-by-step. Provides precise indexing in robotic assembly, packaging and test lines.
- Position repeatability ±5 arcsec
- 2 – 24 stations
- High-speed capacity
Custom Profile Cam
Custom acceleration and velocity profiles beyond standard motion laws; designed and manufactured with CAD/CAM software support. Spline, polynomial or point-cloud-based profiles.
- Spline/polynomial profile
- Point-cloud-based machining
- FEA contact stress analysis
CNC Machined Complete Shaft
Integrated camshaft solutions carrying multiple cam profiles on the same shaft axis, providing multiple motion outputs. Engine camshafts and automation sub-system shafts are produced within this scope.
- Multi-cam integrated shaft
- Hardened and ground
- CMM profile verification
Our Manufacturing Process
Every step from cam profile design to final CMM measurement is traceable and documented. Motion simulation provides pre-production validation.
All Our ServicesMotion Analysis
Output motion, velocity and acceleration profile analysis; motion law selection and simulation validation.
CAD/CAM Profile
3D cam profile modelling and 5-axis CNC toolpath generation; collision control.
5-Axis CNC Milling
Profile machining; complex curved surfaces machined in a single setup with continuous 5-axis motion.
Heat Treatment
Induction hardening or vacuum case hardening; guaranteed HRC 58–62 hardness on contact surfaces.
CNC Profile Grinding
Post-heat-treatment profile grinding; final precision pass to achieve ±0.005 mm tolerance class.
CMM Profile Measurement
CMM comparison of theoretical vs actual profile at every coordinate point; delivered with deviation report.
Materials We Use
Material selection is made according to cam profile geometry, surface hardness and fatigue strength requirements.
42CrMo4 / 34CrNiMo6
Cam profiles operating under high torque and stress
100Cr6 (Rulman çeliği)
60+ HRC surface hardness; maximum wear resistance
C45 / Ck45
Medium-duty and general-purpose cam profiles
GGG70L Cast Iron
Vibration-damping, large-volume cast camshafts
16MnCr5
Lightweight cam systems with case hardening and surface treatment
Stainless Steel 440C
Corrosive environment and medical special cam applications
Application Areas
AXIOM cam mechanisms provide precise motion control in automation facilities, automotive engine systems and packaging lines.
Why AXIOM Precision?
±0.005 mm Profile Tolerance
Manufacturing to the tightest tolerance classes in the industry with 5-axis CNC and profile grinding.
Motion Simulation
Virtual pre-production simulation; vibration and acceleration discontinuities detected in advance.
CMM Profile Measurement
Theoretical vs actual profile comparison report for every part; delivery assurance.
Heat Treatment Expertise
Long-lasting hardness on contact surfaces; induction and vacuum case hardening alternatives.